- Standard
- Laboratory Water Valves
- High Flow Water Valves
- laboratory single faucets
- laboratory mixing faucets
- combination fixtures
- Foot-Operated faucets
- Pre-Rinse units
- Pure Water Faucets
- pressure regulator fixtures
- fine control needle valves
- needle valves
- steam valves
- laboratory ball valves
- remote control valves
- remote control outlet fittings
- electrical fixtures
- apparatus & lattice rod Assy's
- accessories & components
- Vandal-Resistant
- ColorTech
- Laboratory Water Valves
- Laboratory Single Faucets
- Laboratory Mixing Faucets
- Multiple Outlet Water Fixtures
- Foot-Operated Faucets
- Pre-Rinse Units
- Pure Water Faucets
(Tin-Lined Brass) - Pure Water Faucets
(Plastic-Lined) - Pure Water Faucets
(Stainless Steel) - Ultra-High Purity Gas Fittings
- High Purity Gas Fittings
- Fine Control Needle Valves
- Fine Control Needle Valves (Stainless)
- Needle Valves
- Steam Valves
- Laboratory Ball Valves
- Push/Turn Gas Valves
- Lift/Turn Gas Valves
- Remote Control Fittings Valves
- Remote Control Outlet Fittings
- Electrical Fittings
- Accessories and Components
- Engineering Information
- Laboratory Safety
CT3173-771WSA
Pressure Regulator Fitting, Suspended Mounting
Application: Point-of-use regulation and control of high purity gases. Used for compressed air and inert gases, including nitrogen, helium, argon and oxygen. Fittings are specially cleaned, assembled and packaged for use with 99.999% pure (5.0) gases.
Finish: Fittings are available with a choice of six powder coated finishes. Specify finish when ordering: white, gray, tan, polished chrome with clear epoxy, satin nickel with clear epoxy or satin chrome with clear epoxy.
Mounting: Reversed tall turret for suspended mounting with 3/8" IPS male heavy duty shank. Pressure regulator mounts on side of turret to conserve space.
Regulator: Non-relieving type with
brass body and neoprene diaphragm.
Inlet pressure range 5-300 PSI.
Outlet pressure range 5-125 PSI.
Valve: Fine control needle valve for precise flow control.
Inlet: 3/8" IPS male inlet.
Outlet: Removable quick connect fitting with 1/4" IPS male plug. If 1/4" OD compression fitting is desired, order CT3174-771WSA.
Quality Assurance: Fitting is specially cleaned, fully assembled and factory tested prior to shipment.
FlowStop Model:
CTFS3173-771WSA Same as above except with FlowStop.
Additional Model:
CT3173-771-2SWSA Same as above except with two regulators and valves at 180 degrees.
