- Standard
- Laboratory Water Valves
- High Flow Water Valves
- laboratory single faucets
- laboratory mixing faucets
- combination fixtures
- Foot-Operated faucets
- Pre-Rinse units
- Pure Water Faucets
- pressure regulator fixtures
- fine control needle valves
- needle valves
- steam valves
- laboratory ball valves
- remote control valves
- remote control outlet fittings
- electrical fixtures
- apparatus & lattice rod Assy's
- accessories & components
- Vandal-Resistant
- ColorTech
- Laboratory Water Valves
- Laboratory Single Faucets
- Laboratory Mixing Faucets
- Multiple Outlet Water Fixtures
- Foot-Operated Faucets
- Pre-Rinse Units
- Pure Water Faucets
(Tin-Lined Brass) - Pure Water Faucets
(Plastic-Lined) - Pure Water Faucets
(Stainless Steel) - Ultra-High Purity Gas Fittings
- High Purity Gas Fittings
- Fine Control Needle Valves
- Fine Control Needle Valves (Stainless)
- Needle Valves
- Steam Valves
- Laboratory Ball Valves
- Push/Turn Gas Valves
- Lift/Turn Gas Valves
- Remote Control Fittings Valves
- Remote Control Outlet Fittings
- Electrical Fittings
- Accessories and Components
- Engineering Information
- Laboratory Safety
CT4200-232SWSA
Double Ball Valve Fitting, Deck Mounted
Application: On/off control of all laboratory gases. For use at pressures up to 75 PSI. When ordered, valves and fittings may be specially cleaned, lubricated and packaged for pure gas service. Valve is certified for gas service by CSA International. Valve is recommended for ADA-compliant applications.
Finish: Fixtures are available with a choice of six powder coated finishes. Specify finish when ordering: white, gray, tan, polished chrome with clear epoxy, satin nickel with clear epoxy or satin chrome with clear epoxy. Click here for more information.
Mounting: Deck mounted turret base with two valves at 180 degrees.
Valve Units: Quarter turn open/close with chrome plated brass balls and molded TFE seals.
Inlet: 3/8" IPS male inlet.
Outlets: 3/8" IPS female outlets with removable seven serration hose ends.
Quality Assurance: Fitting is fully assembled and factory tested prior to shipment.
FlowStop Model:
CTFS4200-232SWSA Same as above except with FlowStop.
Additional Models:
CT4200-232AWSA Same as above except with two ball valves at 90 degrees.
CT4200-234WSA Same as above except with four ball valves.
