- Standard
- Laboratory Water Valves
- High Flow Water Valves
- laboratory single faucets
- laboratory mixing faucets
- combination fixtures
- Foot-Operated faucets
- Pre-Rinse units
- Pure Water Faucets
- pressure regulator fixtures
- fine control needle valves
- needle valves
- steam valves
- laboratory ball valves
- remote control valves
- remote control outlet fittings
- electrical fixtures
- apparatus & lattice rod Assy's
- accessories & components
- Vandal-Resistant
- ColorTech
- Laboratory Water Valves
- Laboratory Single Faucets
- Laboratory Mixing Faucets
- Multiple Outlet Water Fixtures
- Foot-Operated Faucets
- Pre-Rinse Units
- Pure Water Faucets
(Tin-Lined Brass) - Pure Water Faucets
(Plastic-Lined) - Pure Water Faucets
(Stainless Steel) - Ultra-High Purity Gas Fittings
- High Purity Gas Fittings
- Fine Control Needle Valves
- Fine Control Needle Valves (Stainless)
- Needle Valves
- Steam Valves
- Laboratory Ball Valves
- Push/Turn Gas Valves
- Lift/Turn Gas Valves
- Remote Control Fittings Valves
- Remote Control Outlet Fittings
- Electrical Fittings
- Accessories and Components
- Engineering Information
- Laboratory Safety
CT4880FT-325
Needle Valve, Wall Mounted
Application: Flow control of all laboratory gases, including special gases such as nitrogen, helium and hydrogen. When ordered, valves and assemblies may be specially cleaned, assembled and packaged for use with high purity (99.998% pure) gases (including oxygen). Valves may also be used for vacuum service. Valves go from closed to fully open in 2 revolutions of the handle, providing good flow regulation.
Finish: Fixtures are available with a choice of six powder coated finishes. Specify finish when ordering: white, gray, tan, polished chrome with clear epoxy, satin nickel with clear epoxy or satin chrome with clear epoxy. Click here for more information.
Mounting: For installation on vertical surfaces (such as drywall) where there is no access behind wall during installation. Valve is threaded onto nipple stubbed out of wall. Threaded escutcheon is then backed up to wall to secure valve and conceal gap.
Valve Unit: Floating stainless steel needle and stainless steel seat. Molded TFE stem packing with adjustable packing nut. All working components are replaceable.
Inlet: 3/8" IPS female inlet.
Outlet: 3/8" IPS female outlet with removable seven serration hose end.
Quality Assurance: Valve is fully assembled and factory tested prior to shipment.
FlowStop Model:
CTFS4880FT-325 Same as above except with FlowStop.
