- Standard
- Laboratory Water Valves
- High Flow Water Valves
- laboratory single faucets
- laboratory mixing faucets
- combination fixtures
- Foot-Operated faucets
- Pre-Rinse units
- Pure Water Faucets
- pressure regulator fixtures
- fine control needle valves
- needle valves
- steam valves
- laboratory ball valves
- remote control valves
- remote control outlet fittings
- electrical fixtures
- apparatus & lattice rod Assy's
- accessories & components
- Vandal-Resistant
- ColorTech
- Laboratory Water Valves
- Laboratory Single Faucets
- Laboratory Mixing Faucets
- Multiple Outlet Water Fixtures
- Foot-Operated Faucets
- Pre-Rinse Units
- Pure Water Faucets
(Tin-Lined Brass) - Pure Water Faucets
(Plastic-Lined) - Pure Water Faucets
(Stainless Steel) - Ultra-High Purity Gas Fittings
- High Purity Gas Fittings
- Fine Control Needle Valves
- Fine Control Needle Valves (Stainless)
- Needle Valves
- Steam Valves
- Laboratory Ball Valves
- Push/Turn Gas Valves
- Lift/Turn Gas Valves
- Remote Control Fittings Valves
- Remote Control Outlet Fittings
- Electrical Fittings
- Accessories and Components
- Engineering Information
- Laboratory Safety
CT5170FT-325
Fine Control Needle Valve, Wall Mounted
Application: Precise flow control of high purity laboratory gases. Ideal for special gases such as nitrogen, oxygen, helium and hydrogen. Valves and assemblies are specially cleaned, assembled and Âpackaged for use with 99.999% pure (5.0) gases. Valves go from closed to fully open in 6 revolutions of handle, providing precise flow regulation. Valves are capable of delivering one bubble of nitrogen gas at a time.
Finish: Fixtures are available with a choice of six powder coated finishes. Specify finish when ordering: white, gray, tan, polished chrome with clear epoxy, satin nickel with clear epoxy or satin chrome with clear epoxy. Click here for more information.
Mounting: For installation on vertical surfaces (such as drywall) where there is no access behind wall during installation. Valve is threaded onto nipple stubbed out of wall. Threaded escutcheon is then backed up to wall to secure valve and conceal gap.
Valve Unit: Floating tapered stainless steel needle and stainless steel seat. Molded TFE stem packing with adjustable packing nut. All working components are replaceable.
Inlet: 3/8" IPS female inlet.
Outlet: 3/8" IPS female outlet with removable seven serration hose end.
Quality Assurance: Valve is fully assembled and factory tested prior to shipment.
FlowStop Model:
CTFS5170FT-325 Same as above except with FlowStop.
Additional Models:
CT5173FT-325 Fine control needle valve with quick connect fitting on outlet.
CT5174FT-325 Fine control needle valve with 1/4" OD compression fitting on outlet.
