CT752

Application: Flow control of laboratory gases, water, steam and pure water in fume hoods and fume cupboards. Valves are installed on the front exterior face of the hood or cupboard. By eliminating an extension rod between the valve and handle, the user has more precise control of the valve. Maintenance of the valve is greatly simplified, since all of the working components of the valve are accessible from the front exterior face of the hood or cupboard.

Finish: Fixtures are available with a choice of six powder coated finishes. Specify finish when ordering: white, gray, tan, polished chrome with clear epoxy, satin nickel with clear epoxy or satin chrome with clear epoxy. Click here for more information.

Panel mounted valve for installation on angle face of hood. Valve is installed from behind panel and is secured with external locking ring on front of hood. Valve inlet and outlet are 3/8" OD copper tubes.

To order valve, select model number desired from below:

Water:

CT752W Compression valve construction for water service.

Laboratory Gases:

CT752FCN Fine control needle valve construction. Valve is specially cleaned, lubricated and packaged for use with high purity gases.

CT752N Needle valve construction for laboratory gases, including vacuum.

Burning Gases:

CT752G Push/turn construction for natural, bottled and other combustible gases.

CT752GI Same as above except with pop-up indicator buttons.

Steam:

CT752S Steam valve construction.

Pure Water:

CT752WTL Tin-lined brass construction for distilled, deionized and reverse osmosis water.