- Standard
- Laboratory Water Valves
- High Flow Water Valves
- laboratory single faucets
- laboratory mixing faucets
- combination fixtures
- Foot-Operated faucets
- Pre-Rinse units
- Pure Water Faucets
- pressure regulator fixtures
- fine control needle valves
- needle valves
- steam valves
- laboratory ball valves
- remote control valves
- remote control outlet fittings
- electrical fixtures
- apparatus & lattice rod Assy's
- accessories & components
- Vandal-Resistant
- ColorTech
- Laboratory Water Valves
- Laboratory Single Faucets
- Laboratory Mixing Faucets
- Multiple Outlet Water Fixtures
- Foot-Operated Faucets
- Pre-Rinse Units
- Pure Water Faucets
(Tin-Lined Brass) - Pure Water Faucets
(Plastic-Lined) - Pure Water Faucets
(Stainless Steel) - Ultra-High Purity Gas Fittings
- High Purity Gas Fittings
- Fine Control Needle Valves
- Fine Control Needle Valves (Stainless)
- Needle Valves
- Steam Valves
- Laboratory Ball Valves
- Push/Turn Gas Valves
- Lift/Turn Gas Valves
- Remote Control Fittings Valves
- Remote Control Outlet Fittings
- Electrical Fittings
- Accessories and Components
- Engineering Information
- Laboratory Safety
CT7837
Recirculating Pure Water Faucet, Polypropylene-Lined, Deck Mounted
Application: Faucets for distilled, deionized and reverse osmosis water. Faucets have exterior brass casing for strength. Interior lining is inert polypropylene (PP) or polyvinylidene fluoride (PVDF), as ordered. Pure water comes in contact only with inert plastic.
Finish: Fixtures are available with a choice of six powder coated finishes. Specify finish when ordering: white, gray, tan, polished chrome with clear epoxy, satin nickel with clear epoxy or satin chrome with clear epoxy. Click here for more information.
Valve Unit: Polypropylene diaphragm-type valve. Brass valve stem and bonnet with elastomer diaphragm. Valve has manual on/off control. Faucet is fully recirculating to eliminate all “dead legs” in pure water system.
Riser: Brass riser with 6" spread and interior polypropylene lining.
Inlet: 7/8" IPS male shank with 3/8" OD tube connections on supply and return. Furnished with compression adaptors for supply and return.
Outlet: Seven serration plastic hose end.
Quality Assurance: Faucet is fully assembled and factory tested prior to shipment.
Additional Model:
CT7837PVDF Same as above except with PVDF valve and interior lining.
