- Standard
- Laboratory Water Valves
- High Flow Water Valves
- laboratory single faucets
- laboratory mixing faucets
- combination fixtures
- Foot-Operated faucets
- Pre-Rinse units
- Pure Water Faucets
- pressure regulator fixtures
- fine control needle valves
- needle valves
- steam valves
- laboratory ball valves
- remote control valves
- remote control outlet fittings
- electrical fixtures
- apparatus & lattice rod Assy's
- accessories & components
- Vandal-Resistant
- ColorTech
- Laboratory Water Valves
- Laboratory Single Faucets
- Laboratory Mixing Faucets
- Multiple Outlet Water Fixtures
- Foot-Operated Faucets
- Pre-Rinse Units
- Pure Water Faucets
(Tin-Lined Brass) - Pure Water Faucets
(Plastic-Lined) - Pure Water Faucets
(Stainless Steel) - Ultra-High Purity Gas Fittings
- High Purity Gas Fittings
- Fine Control Needle Valves
- Fine Control Needle Valves (Stainless)
- Needle Valves
- Steam Valves
- Laboratory Ball Valves
- Push/Turn Gas Valves
- Lift/Turn Gas Valves
- Remote Control Fittings Valves
- Remote Control Outlet Fittings
- Electrical Fittings
- Accessories and Components
- Engineering Information
- Laboratory Safety
CT8430-MR
Ultra-High Purity Gas Fitting, Fume Hood Mounted
Application: Point-of-use regulation and control of ultra-high purity (6.0) gases. Used for pure compressed air, inert gases (including nitrogen, helium, argon and oxygen) and corrosive and flammable gases (including hydrogen). Fittings are specially manufactured, cleaned, assembled and packaged for use with 99.9999% pure (6.0) gases.
Finish: Pressure regulator, pressure gauge, control valve and metering valve are machined into brass body for compact installation. All internal surfaces are specially machined and electropolished for smooth, nonporous surface. Handles are gray molded plastic and are indexed per U.S. standard for color-coding.
Fitting Finish: Fittings are available with a choice of six powder coated finishes. Specify finish when ordering: white, gray, tan, polished chrome with clear epoxy, satin nickel with clear epoxy or satin chrome with clear epoxy.
Mounting: Heavy duty aluminum face plate secures to front face of hood with screws. Face plate is available with a choice of finishes. Specify finish when ordering: white, gray, tan, polished aluminum with clear epoxy or brushed aluminum with clear epoxy.
Control Valve: Diaphragm-type on/off valve to control
supply of gas to fitting.
Regulator: Single stage pressure regulator with Hastelloy diaphragm and TFE seat. Inlet pressure range 25-580 PSI. Outlet pressure ranges are 0-20 PSI, 0-60 PSI or 0-150 PSI (specify when ordering).
Metering Valve: Diaphragm-type metering valve to precisely control flow of gas. Ten revolutions of handle from closed to fully open.
Outlet Fitting: 1/4” OD compression fitting outlet inside fume hood.
Inlet/Outlet: Pressure regulator/valve inlet and outlet are 1/4” OD compression. Fume hood fitting inlet is 1/4” OD compression.
Quality Assurance: Fitting is specially cleaned, fully assembled and factory tested for function and leakage prior to shipment. Certified maximum leakage rate is less than 10-8 mbar liters/second.
Additional Model:
CT8430-QR Same as above except with 1/4” IPS quick
connect fitting inside fume hood.
