Remote Control Fitting Ordering Instructions

To order remote control assemblies, please proceed as follows:

Select the desired remote control valve. Specify:
- Valve construction, by using the appropriate letter suffix (ex: CT750N for needle valve construction, CT750W for water valve construction, etc.)
- Valve service (cold water, gas, air, vacuum, etc.).
- For CT739 valve, whether valve is for right hand or left hand mounting.
Select the desired outlet fitting.
On the table below, find the desired valve and outlet fitting. Read across and down to find the appropriate assembly number.
For assemblies using rod-type valves, specify:

“L” dimension, measured from the top of the index disc to the centerline of the valve. If the “L” dimension is not specified, a standard dimension of 20” will be furnished.
“Y” dimension, measured from the centerline of the valve to the back of the flange or turret on the outlet fitting. If the “Y” dimension is not specified, a standard dimension of 2 3/4” will be furnished.
Type of guide plate desired, as follows:
- PA Black nylon flat guide plate with screws for straight panel
- PB Black nylon threaded guide plate for straight panel
- PC Black nylon 45 degree angle guide plate
- PD Black nylon press-in guide bushing for straight panel