- Standard
- Laboratory Water Valves
- High Flow Water Valves
- laboratory single faucets
- laboratory mixing faucets
- combination fixtures
- Foot-Operated faucets
- Pre-Rinse units
- Pure Water Faucets
- pressure regulator fixtures
- fine control needle valves
- needle valves
- steam valves
- laboratory ball valves
- remote control valves
- remote control outlet fittings
- electrical fixtures
- apparatus & lattice rod Assy's
- accessories & components
- Vandal-Resistant
- ColorTech
- Laboratory Water Valves
- Laboratory Single Faucets
- Laboratory Mixing Faucets
- Multiple Outlet Water Fixtures
- Foot-Operated Faucets
- Pre-Rinse Units
- Pure Water Faucets
(Tin-Lined Brass) - Pure Water Faucets
(Plastic-Lined) - Pure Water Faucets
(Stainless Steel) - Ultra-High Purity Gas Fittings
- High Purity Gas Fittings
- Fine Control Needle Valves
- Fine Control Needle Valves (Stainless)
- Needle Valves
- Steam Valves
- Laboratory Ball Valves
- Push/Turn Gas Valves
- Lift/Turn Gas Valves
- Remote Control Fittings Valves
- Remote Control Outlet Fittings
- Electrical Fittings
- Accessories and Components
- Engineering Information
- Laboratory Safety
ES658
Emergency Shower, Semi-Concealed, Stainless Steel Shower Head
application: Emergency shower for semi-concealed mounting in a finished ceiling. Unit is designed for installation in ceilings 8-10 feet above finished floor.
shower head: Shower head is 10" diameter stainless steel (ES658) or 8" diameter chrome plated cast brass (ES658PCC). Furnished with vertical supply pipe and ceiling escutcheon for mounting shower head at desired height above finished floor.
valve: 1" IPS brass stay-open ball valve. Valve is
US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm, 63 1/2" stainless steel pull rod and stainless steel ceiling guide plate.
pipe and fittings: Exposed pipe and ceiling escutcheon are brushed stainless steel (ES658) or polished chrome plated brass (ES658PCC).
supply: 1" NPT female inlet.
sign: ANSI-compliant identification sign.
Additional Options:
- FC20 Regulates shower flow rate to 20 GPM.
- SC Self-closing ball valve. Note: Emergency showers with self-closing valves do not comply with ANSI Z358.1 - 2004.
- AP280-230 Electric Light and Alarm Horn
Flashing light/alarm horn unit is recess mounted in finished wall. Light is illuminated and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware. - TMV AP3800 thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004. Refer to “Tempering Units” section for complete technical and product selection information.
