- Standard
- Laboratory Water Valves
- High Flow Water Valves
- laboratory single faucets
- laboratory mixing faucets
- combination fixtures
- Foot-Operated faucets
- Pre-Rinse units
- Pure Water Faucets
- pressure regulator fixtures
- fine control needle valves
- needle valves
- steam valves
- laboratory ball valves
- remote control valves
- remote control outlet fittings
- electrical fixtures
- apparatus & lattice rod Assy's
- accessories & components
- Vandal-Resistant
- ColorTech
- Laboratory Water Valves
- Laboratory Single Faucets
- Laboratory Mixing Faucets
- Multiple Outlet Water Fixtures
- Foot-Operated Faucets
- Pre-Rinse Units
- Pure Water Faucets
(Tin-Lined Brass) - Pure Water Faucets
(Plastic-Lined) - Pure Water Faucets
(Stainless Steel) - Ultra-High Purity Gas Fittings
- High Purity Gas Fittings
- Fine Control Needle Valves
- Fine Control Needle Valves (Stainless)
- Needle Valves
- Steam Valves
- Laboratory Ball Valves
- Push/Turn Gas Valves
- Lift/Turn Gas Valves
- Remote Control Fittings Valves
- Remote Control Outlet Fittings
- Electrical Fittings
- Accessories and Components
- Engineering Information
- Laboratory Safety
Vertical Rods
3/4” diameter vertical rods are machined with the top end rounded and the bottom end tapered to fit into a rod socket. 1/2” diameter vertical rods are machined with the top end rounded and the bottom end threaded. 1/2” rods may be used either with a threaded socket or with the AAP120 tapered adaptor and a tapered socket.
models
AAP110-024 3/4” dia. x 24” Vertical Rod (Tapered)
AAP110-036 3/4” dia. x 36” Vertical Rod (Tapered)
AAP110-039 3/4” dia. x 39” Vertical Rod (Tapered)
AAP110-048 3/4” dia. x 48” Vertical Rod (Tapered)
AAP125-024 1/2” dia. x 24” Vertical Rod (Threaded)
AAP125-036 1/2” dia. x 36” Vertical Rod (Threaded)
AAP125-039 1/2” dia. x 39” Vertical Rod (Threaded)
AAP125-048 1/2” dia. x 48” Vertical Rod (Threaded)
Specification Drawing
3D Model
